Resetting Your Phone - Samsung SCHR510 User Manual

Portable dual-mode telephone
Hide thumbs Also See for SCHR510:
Table of Contents

Advertisement

Note: Emergency number 911 is hard-coded into your phone. You can dial this number any time, even
when the phone is locked or restricted. If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Important!: Because of various transmission methods, network parameters, and user settings necessary
to complete a call from your wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all wireless networks at all times.
Important!: DO NOT depend on this phone as a primary method of calling 911 or for any other essential or
emergency communications.
Remember to always turn your phone on and check for adequate signal strength
before placing a call.
Store Emergency Numbers
In standby mode, press the MENU key (
1.
Settings), and
prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Enter the lock code, then press
2.
Press
3.
@
entries.
Enter an emergency number (up to 32 digits in length).
4.
Press the
5.
Call Emergency Numbers in Lock Mode
In standby mode, enter the emergency number.
1.
Press the
2.

Resetting Your Phone

Reset Phone returns all setup options to their factory default.
In standby mode, press the MENU key (
1.
Settings), and
prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
146
(for Phone Settings), and
,
, or
to select from the three emergency number
)
)
key to save the number that you entered.
OK
key to place the call.
(for Phone Settings), and
), then press
OK
for Security. You're
for Emergency #.
), then press
OK
for Security. You're
(for
(for

Advertisement

Table of Contents
loading

This manual is also suitable for:

R510 - sch wafer cell phoneWafer r510

Table of Contents