Say, "Call".
2.
You are prompted to "Say the name or #".
Speak clearly and say the name of a person in your Contacts list, first name
3.
followed by last name.
If the name is recognized, Voice Dial repeats the name and dials the
number.
If Voice Dial is not sure which name you said, it displays a choice list of up
to three names and prompts you with "Did you say?" followed by the first
name on the list.
Say "Yes" to confirm the name or "No" to hear the next name, or use the
4.
keypad to select the correct name from the list. (See 'Choice Lists" on
page 121, for more information.)
• Press the Repeat (right) soft key (
• Press the Settings (left) soft key (
(
) to exit Voice Dial without dialing.
If the recognized name has multiple numbers stored for it (that is, Home,
Work, Mobile, and so on), Voice Dial displays the possible choices and
prompts you with "Which number?"
Say one of the following number types:
5.
• "Home"
• "Work"
• "Mobile"
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
In standby mode, press and hold the
1.
"Say a Command" appears in the display and is pronounced through the
speaker.
Say "Call".
2.
VoiceSignal prompts you to "Say the name or #".
Speak clearly and say the telephone number of the person you want to call.
3.
For example, say "7 8 1 9 7 0 5 2 0 0."
Making a Call — Voice Dialing
) to say the name again.
), then press the Exit (right) soft key
key.
Call Functions
27