Table of Contents
Advertisement
Sensitivity
In standby mode, press the MENU key (
1.
and
)
@
)
Sensitivity. The COMMANDS screen appears in the display.
Use the navigation keys to adjust the selected Sensitivity setting to Reject
2.
More spoken commands or names or to Reject Less spoken commands
or names.
Press the
3.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the numbers you say, try
adapting digit dialing to your voice. Adapting can improve the accuracy of digit
recognition, especially for people with strong regional accents.
Note: After you adapt Digit Dial, your phone is customized to your voice, and your voice only. Others will not
be able to use it unless they reset the phone to factory defaults.
Adaptation involves recording several sequences of four digits each. The recording
process takes about a minute.
Tips for Adapting Digit Dialing
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there is an
•
unexpected noise that spoils the recording, re-record that sequence.
Only adapt digits if you are regularly having problems with digit dialing. Once you
•
adapt, digit dialing will not work as well for other people using your phone. (You
can always reset digit adaptation to its original state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
In standby mode, press the MENU key (
1.
and
@
)
)
Digit Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
122
(for Voice Service),
key to accept the new setting.
OK
(for Voice Service),
), then press
OK
(for Voice Settings), and
), then press
OK
(for Voice Settings), and
(for Tools),
for
(for Tools),
for
Advertisement
Chapters
Table of Contents
