Eaton ELC-EX08NNDR Instruction Sheet

ELC-EX08NNDR/T
ELC-EX16NNDR/T
ELC-EX08NNDN
ELC-EX08NNAN
ELC-EX08NNNR/T
ELC-EX06NNNI
Digital Input Digital Output Module
This Instruction Sheet provides descriptions for electrical specifications, installation & wiring.
This is an OPEN TYPE Controller. The ELC should be kept in an enclosure away from
airborne dust, humidity, electric shock risk and vibration. Also, it is equipped with protective
methods such as some special tools or keys to open the enclosure, so as to avoid the hazard
to users and the damage to the ELC. Do NOT touch terminals when power on.
DC type ELC never connects the AC main circuit power supply to any of the input/output
terminals, as it will damage the ELC. Check all the wiring prior to power up.
Power, input and output (I/O) wiring must be in accordance with Class 1, Div. 2 wiring methods
- Article 501-10(B)(1) of the National Electrical Code.
Suitable for use in Class 1, Division 2, Groups A, B, C, D or Non-Hazardous locations only.
Warning – Explosion hazard - Substitution of components may impair suitability for Class 1,
Division 2.
Warning – Explosion hazard - Do not disconnect equipment unless power has been switched
off or the area is known to be Non-Hazardous.
1

1.1. Product Profile and Outline

25.2
4
POWER POWER
s
s
3
L.V L.V
X0
X1
X2
1 X3
X4
X5
X6
X7
2
3
7
6
5
1. Status indicator (Power and low voltage)
3. Extension unit clip
5. DIN rail clip
7. Nameplate
9. DIN rail (35mm)
Instruction Sheet
WARNING

INTRODUCTION

25.2
60
POWER
3
L.V
8
1
EXTENSION
PORT
9
10
2
3
8
2. Model Name
4. Input/output terminal
6. Mounting hole of the extension unit
8. Extension unit clip
10. Extension port
2006-11-27
5011630002-EX02
60
4
s
s
X0
X1
8
X2
X3
EXTENSION
C0
PORT
Y0
C1
Y1
10
C2
Y2
C3
Y3
7
8
6
5
9