Machine Scrapping; Waste Storage; Recyclability; Procedure Regarding Appliance Dismantling Macro Operations - Electrolux HOST11 Installation Manual

H

MACHINE SCRAPPING

WARNING
Refer to
"WARNINGS and
Safety Information "
H.1 Waste storage
At the end of the product's life-cycle, make sure it
is not dispersed in the environment. The doors
must be removed before scrapping the appliance.
SPECIAL waste materials can be stored
temporarily while awaiting treatment for disposal
and/or permanent storage. In any case, the
current environmental protection laws in the user's
country must be observed.
H.2 Recyclability
Our appliances are manufactured using more than
90% metals (stainless steel, aluminium,
galvanised sheet,
copper, etc.) which can be recycled by means of
the conventional recovery structures, in
compliance with the current regulations in the
country of use.
H.3 Procedure regarding appliance
dismantling macro operations
Before scrapping the machine, make sure to
carefully check its condition, and in particular any
parts of the structure that can give or break during
scrapping. The machine's parts must be disposed
of in a differentiated way, according to their
different characteristics (e.g. metals, oils, greases,
plastic, rubber, etc.).
Different regulations are in force in the various
countries, therefore comply with the provisions of
the laws and competent bodies in the country
where scrapping takes place. In general, the
appliance must be taken to a specialised
collection/scrapping centre. Dismantle the
appliance, grouping the components according to
their chemical characteristics, remembering that
the compressor contains lubricant oil and
refrigerant fluid which can be recycled, and that
the refrigerator components are special waste
assimilable with urban waste.
The symbol on the product indicates
that this product should not be
treated as domestic waste, but must
be correctly disposed of in order to
prevent any negative consequences
for the environment and human
health. For further information on
the recycling of this product, contact
the local dealer or agent, Customer
Care or the local body responsible
for waste disposal.
NOTE!
When scrapping the machine, any
markings, this manual, and other
documents concerning the
appliance, must be destroyed.
24