Advertisement
REVOLUTION
Warning: Improper use could result in injury.
Use device with caution.
DOSING GUN
Battery Charging
Take note of the polarity of the batteries. Remove the 2
batteries from the bottom of the Dosing Gun and
Quick Start Guide
insert into charger.
Maintenance:
It is imperative that you clean the barrel after every session.
THE DIGITAL KEYPAD
Remove the barrel, rinse the barrel with clean,
warm water and dry it thoroughly. Remove the inlet and exit
valves and clean thoroughly. Lubricate the
piston O-ring with petroleum jelly or food/cooking oil.
For technical assistance go to the Owners Hub at www.tepari.com
FOR SERVICE OR REPAIRS CONTACT:
New Zealand:
0800 837 274
Australia:
1800 650 682
Main screen
The top left shows a Wi-Fi icon with bars when it is active. The top right shows the
battery state and in the main area the current dose.
Power button
Click once to turn on, press and hold momentarily to turn off.
Prime button
Push this button and pull the trigger to fill the barrel. Point the Dosing gun up to expel any air
in the barrel. This gives manual control of the piston. Click again to exit this mode.
Menu button
Use this button to adjust the delivery and refill speed. Also use it to turn on sound alert, repeat
dose delay, multi dose (max 10ml dose) and barrel change. The Menu button also functions as
the Select button.
Statistics button
Push to see the amount of product administered and number of doses
Up and Down buttons
Push these buttons to adjust the dose volume.
Batteries
Take note of the polarity of the batteries. Remove the 2 batteries from the bottom of the Dosing Gun and
insert into charger.
Maintenance:
It is imperative that you clean the barrel after every session. Remove the barrel, rinse the barrel with clean,
warm water and dry it thoroughly. Remove the inlet and exit valves and clean thoroughly. Lubricate the
piston O-ring with petroleum jelly or food/cooking oil.
United States:
Rest of world:
active
800 315 0433
+64 3 433 0077
inactive
Advertisement
