Setting Batch Quantities; Setting Batch Quantities For Coin Rolls; Setting Batch Quantities For Coin Trays; Setting Other Batch Quantities - Cassida C300 User Manual

Coin counter/sorter/wrapper
Hide thumbs Also See for C300:
Table of Contents

Advertisement

2.4 Setting Batch Quantities

Each denomination can be assigned a batch quantity.

1. Setting batch quantities for coin rolls

Press and hold the "+" button for approximately three seconds until "L" is shown on the display.
This automatically programs each coin denomination for bank coin roll amounts as follows:
Denomination
$2
$1
25¢
10¢

2. Setting batch quantities for coin trays

Press and hold the "SET" button for approximately three seconds until "H" is shown on the
display. This automatically programs each coin denomination for coin tray amounts as follows:
Denomination
$1
25¢
10¢
12
Quantity
25 (Canadian model only)
25
40
50
40
NOTE: (Other countries denominations
50
and capacities vary by country)
Quantity
100
350
400
200
NOTE: (Other countries denominations
350
and capacities vary by country)

3. Setting other batch quantities

Press the "BAT" button to access the batch screen.
Press the ''SET'' button to select a desired denomination to batch.
To assign a batch quantity for this denomination press the "BAT" button until the desired batch
quantity appears on the display (0, 10, 20, 25, 50, 80, 100, 120, 150, 200, 300, 400, 500,
600, 700, 800, 900).
Fine adjustments to batch quantity can be made by pressing the "-" or "+" button.
Repeat this procedure to set the desired batch quantities for other coin denominations.
Once all denominations are set, press the "START/STOP" button to start counting.
NOTE: The C300 will stop when a desired batch quantity is completed for any of the
denominations. ''BAT FULL'' will be displayed on the top left corner of the screen and the
denomination line will be blinking.
To resume counting, press the "START/STOP" button.
Pressing the "CLEAR" button twice will reset the count and the machine will start batching
from zero.
NOTE: When operating in batch mode, the C300 will keep a running total for each denomination
coin. For example, after four batches of 50 pennies have been dispensed, the C300 will stop and
display:
I
0.01 X 200 = 2.00
C
Cassida C300 Coin Counter/Sorter/Wrapper
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents