Add Function; Batch Function - Cassida 8800R User Manual

3.8 Add Function

This function is available by pressing the ADD button. When the ADD function is activated "ADD" will be
displayed on the home screen.
In this function, the unit will count multiple stacks of bills while keeping track of the total amount and value of
bills counted. Place the first stack of bills to be counted into the hopper. The number and value of bills will be
displayed on screen. When ready to count the next stack of bills, empty the stacker and add the new stack
to be counted into the hopper. The unit will continue counting and add the new count to the total. When the
operation is complete, you can view a detailed report by pressing the REPORT button. Note that the Cassida
8800R will keep in memory the last value used when turned off.
To exit the ADD function, press the ADD button again.

3.9 Batch Function

This function is available by pressing the BATCH button. When the BATCH function is activated, batch size and
"ON" is displayed on the home screen.
BATCH function is used to select a batch quantity for a specific counting process. With the BATCH function
active, the machine counts a preset number of bills and then stops counting when the batch number has been
reached, even if bills remain in the hopper. You may press the BATCH button repeatedly to cycle through
different preset batch quantities (100, 50, 20, 10), or use the "arrow up" and "arrow down" buttons to
manually select your desired batch quantity.
When the set batch quantity is reached, the Cassida 8800R will automatically stop and a "BATCH
COMPLETE" message will be displayed on the screen alongside the number of bills counted. When the
stacker is emptied, the machine will automatically continue to count up to the preset batch quantity to create
another batch.
If the hopper runs out of bills before a batch is completed, the machine will display "BATCH INCOMPLETE"
on screen, At this point, the user may add bills to the hopper to complete the batch or remove the incomplete
batch from the machine.
To exit the BATCH function, press the BATCH button until BATCH disappears on the screen.
16