4: Removing Z-Wave Devices; Removing Devices Using Exclusion Mode; Removing Failed Nodes - Nice FIBARO YH-001 User Manual

4: REMOVING Z-WAVE DEVICES

4.1: REMOVING DEVICES USING EXCLUSION MODE

To remove the device from the this or other Z-Wave network:
1. Open the Configuration Interface.
2. Go to > Devices.
3. Click .
4. Select Z-Wave Device.
5. Follow removing procedure on the device (according to its manual).

4.2: REMOVING FAILED NODES

To remove the device from the Z-Wave network if it is not responding:
1. Open the Configuration Interface.
2. Go to
> Devices.
3. Go to Z-Wave tab.
4. Click next to the device you want to force remove.
5. Click Force remove.
removIng Z-Wave devIces
9