7: Z-Wave Associations; Creating Associations; Deleting Associations - Nice FIBARO YH-001 User Manual

7: Z-WAVE ASSOCIATIONS

Associations allow devices to control other devices directly within
the Z-Wave network without the participation of the gateway. Devices
such can continue to work and operate selected devices even when
the gateway is damaged or turned off (in case of a fire, flood, or system
malfunction).

7.1: CREATING ASSOCIATIONS

1. Open the Configuration Interface.
2. Go to > Devices.
3. Click the device you want to associate to expand it.
4. Go to Associations
5. Select the source EndPoint and Association Group (refer to manual of
the device for more information).
6. Select the target device you want to associate with.
7. Click to set the association.
8. If the device is battery powered, wake it up manually or wait for next
automatic wake up.

7.2: DELETING ASSOCIATIONS

1. Open the Configuration Interface.
2. Go to > Devices.
3. Click the device from which you want to delete the association.
4. Go to Associations
5. Click next to the association you want to delete.
6. If the device is battery powered, wake it up manually or wait for next
automatic wake up.
tab.
tab.
Z-Wave assocIatIons
15