Viewing Events History; Performing Actions On Devices With Specific Command Classes - Nice FIBARO YH-001 User Manual

12

6.4: VIEWING EVENTS HISTORY

Using History panel you can check all events in the system, like: changes
in statuses of devices, activated scenes and notifications.
1. Open the Configuration Interface.
2. Go to
3. You will see full history of your system.
6.5: PERFORMING ACTIONS ON DEVICES WITH
SPECIFIC COMMAND CLASSES
Basic
In the Dashboard
bar you will see the last known state and you will be able to:
• Click
• Click
Binary Switch
In the Dashboard
bar you will see the last known state and you will be able to:
• Click
• Click
Central scene
In the Device Settings (
go to
utes with scenes that will be activated after receiving them:
• Click
Color Switch
In the Dashboard
bar you will see the last known state and you will be able to:
• Click
• Click
• Change
• Click
• Click
• Click
For each color component:
• Change slider position – set new component value,
managIng devIces
.
, click
– set 0xFF,
ON
OFF – set 0x00.
, click
– set 0xFF,
ON
OFF – set 0x00.
Advanced tab. You will see the list of all Scene IDs and key attrib-
ADD ACTION
received the specific Scene ID and key attribute.
, click
ON – turn ON the light,
– turn OFF the light,
OFF
Brightness
– start increasing brightness,
– start decreasing brightness,
– stop increasing/decreasing component.
on device tile, then on the displayed side-
on device tile, then on the displayed side-
> Devices), click the device to expand it and
– create new scene that will be activated when
on device tile, then on the displayed side-
slider position – set new brightness,