Table of Contents
Advertisement
10: RESETTING TO FACTORY DEFAULTS
10.1: RESETTING SYSTEM TO FACTORY DEFAULTS
Caution! The whole configuration will be removed and
!
lost if not backed up.
This feature allows you to restore the whole system to factory settings. It
means the factory software version will be restored and all data from the
system A and B will be deleted (users, devices, scenes etc.).
If the gateway is set as Z-Wave secondary controller use this procedure
only when the primary controller is missing or otherwise inoperable.
1. Open the Configuration Interface.
2. In the top right corner click user name
3. Choose
Recovery Mode
4. Confirm.
5. Wait for the system to reboot, the LED indicator will be pulsing red.
6. When the LED indicator turns solid red, refresh the browser tab.
7. Click
Factory Reset
8. Check
"Yes, I'm sure and I know what I'm doing"
9. Confirm.
10.2: RESETTING Z-WAVE TO FACTORY DEFAULTS
Resetting the Z-Wave network removes all the Z-Wave devices from the
gateway's memory, but the other data remains unchanged. Scenes that
used Z-Wave devices will not work anymore.
1. Open the Configuration Interface.
2. Go to
>
Z-Wave.
3. Under
Reset Z-Wave
4. Confirm.
from the menu.
under
Network Status
click Reset.
section.
checkbox.
resettIng to factory defaults
19
Hide quick links:
Advertisement
Table of Contents
