Advertisement
Quick Links
Adult assembly required
Small parts may present choking hazard prior to assembly.
Enclosed please find simple step-by-step instructions to help you
quickly assemble your products. Before you begin we recommend
that you following the steps below:
1. Plesae read the instructions thoroughly.
2. Identify all parts and hardware.
3. You will need the following tools:
Philips head screw drive
Flat head screw drive
Hammer
DO NOT use power drills or drivers
To protect your parts during assembly please place them on a soft
surface.
To clean surface use only water on a damp cloth. DO NOT use
window cleaners or cleaning abrasives as it will scratch the surface
and could damage the protective coating.
Dream On Me Inc.
1532 S WASHINGTON AVE
PISCATAWAY TWP NJ 08854
CUSTOMER SERVICE: 732-366-1788
ASSEMBLY INSTRUCTIONS
ITEM NO: 641
Dream On Me Haven
1
641
MADE IN CHINA
Advertisement
Related Manuals for Dream On Me DOM FAMILY 641
Summary of Contents for Dream On Me DOM FAMILY 641
- Page 1 Dream On Me Inc. ASSEMBLY INSTRUCTIONS 1532 S WASHINGTON AVE PISCATAWAY TWP NJ 08854 ITEM NO: 641 CUSTOMER SERVICE: 732-366-1788 Dream On Me Haven Adult assembly required Small parts may present choking hazard prior to assembly. Enclosed please find simple step-by-step instructions to help you quickly assemble your products.
- Page 2 SUFFOCATION HAZARD--Infants have suffocated in gaps between extra padding and side of the cradle.On soft bedding Never add a pillow or comforter.Use only the pad provided by Dream On Me.Never place addtional padding under an infant. To reduce the risk of SIDS,pediatricians recommend healthy infants be placed on their backs to sleep,unless otherwise advised by your physician.
- Page 4 PARTS LIST FOR #641 Head board Bottom (2PCS) Head board Top (2PCS) Rail (2PCS) Center Base Rail (1PC) Panel MDF (1PC) F:Mattress (1PC) HARDWARE AND TOOLS DIAGRAM Assembly bolt 1-3/4”(8 pcs) Shelf brace screw 1-3/8” (6 pcs) Allen key(2 pcs) Cradle lock screw (4 pcs) 1-3/4”...
- Page 5 STEP 1 Connect rail (B) to one of the headboard (A) by bolts (a) DO NO’T FULLY TIGHTEN. ALL THE BOLTS. b x 2 STEP 2 Insent the bottom shelf (C) to the gap of the headboard(A) and rails (B). a x 8...
- Page 6 STEP 3 Connect another headboard (A) to the rail (B) by bolts (a) . TIGHTEN ALL BOLTS.
- Page 7 STEP 4 Connect the four cradle locks(f) to the head board (A) with the bolts (d) and plastic washers (g). Then put in the mattress (D). STEP Put down the four cradle locks (f) to make the cradle stable. T ake it ,then it can swing. UNLOCK LOCK...
-
Page 8: Limited Warranty
LIMITED WARRANTY...
Need help?
Do you have a question about the DOM FAMILY 641 and is the answer not in the manual?
Questions and answers