Related Manuals for H-P Products TurboCat Zoom
Summary of Contents for H-P Products TurboCat Zoom
- Page 1 OWNER'S MANUAL Review this manual before operating your TurboCat Zoom Turbine Powerhead ® TURBINE POWERHEAD P/N 8429 • 6/20...
- Page 2 TURBOCAT ZOOM TURBINE POWERHEAD TABLE OF CONTENTS: PAGE Safety Instructions ........................3 Using your TurboCat Zoom Turbine Powerhead ............4 Maintenance and Care ......................7 Troubleshooting the TurboCat Zoom Turbine Powerhead ........10 Service Information and Replacement Parts ..............11 Limited Warranty ........................11 IMPORTANT SAFETY INSTRUCTIONS...
- Page 3 USING YOUR TURBOCAT ZOOM TURBINE POWERHEAD This System is Designed for Dry Pick Up Only Your TurboCat Zoom Turbine Powerhead runs off the airflow of your vacuum system. It has no on/off switch. Whenever it is attached to a running vacuum system, it will automatically operate.
- Page 4 The belt should be checked periodically to ensure it’s in good condition. If stretched, cracked or broken, it should be replaced. 1. Turn the vacuum system off and disconnect the TurboCat Zoom from the system. 2. Turn the powerhead over and rotate the two black latches until they align with the clear plastic belt cover.
- Page 5 Belt Flanges Removing Clogs If the TurboCat Zoom Powerhead becomes obstructed: 1. Turn the vacuum system off and disconnect the TurboCat Zoom from the system. 2. Turn the powerhead over and rotate the two black latches until they align with the openings in the clear plastic belt cover. Remove the cover.
- Page 6 Powerhead is Difficult to Push If your TurboCat Zoom is difficult to push while vacuuming, check the following: • Change the direction you are vacuuming to check if it’s easier to push the powerhead.
- Page 7 SERVICE INFORMATION The instructions in this booklet serve as a guide to routine maintenance. If additional service or repairs are required, please call 1-800-822-8356 or visit www.centralvacservice.com for Authorized Servicing Dealer contact information. REPLACEMENT PARTS...
- Page 8 Seller’s instructions will be free from defects in materials and workmanship for a period of ninety (90) days from the date of initial sale by H-P Products, Inc. This warranty does not cover consumable parts such as replacement belts. This warranty is limited to the replacement of defective parts and any costs of shipping shall be incurred by the purchaser.
Need help?
Do you have a question about the TurboCat Zoom and is the answer not in the manual?
Questions and answers