Advertisement
Attention Installer: Please be sure this instruction sheet and warranty information are left with the customer when installation is complete.
USING THE SYSTEM
Pull hose down and hold handle at waist level. The hose will automatically lock into place.
1.
Turn the system on using the on/off switch inside the valve to begin vacuuming. The system can be used to
2.
vacuum dry messes. Optional attachments may be used on the hose end to meet various cleaning needs.
1
STORING THE HOSE
With the system on, unlock the hose by grabbing it approximately 8-inches from the valve and rotate the
1.
hose to the left until it releases.
Partially cover the handle end with hand to retract the hose.
2.
Once fully retracted, push the handle end onto the rubber ball and the system will automatically turn off.
3.
1
H-P Products, Inc. • 512 W. Gorgas St., Louisville, Ohio 44641 • www.reachfortheclean.com • 80267 • 02/20
OPERATING INSTRUCTIONS
2
On/Off
Switch
2
3
Advertisement
Table of Contents
Related Manuals for H-P Products Spot
Summary of Contents for H-P Products Spot
- Page 1 Partially cover the handle end with hand to retract the hose. Once fully retracted, push the handle end onto the rubber ball and the system will automatically turn off. H-P Products, Inc. • 512 W. Gorgas St., Louisville, Ohio 44641 • www.reachfortheclean.com • 80267 • 02/20...
- Page 2 (3) years from original date of consumer purchase. In the event of a defect in the Spot Hose, it will be repaired or replaced, at H-P Products’ option, at an Authorized Dealer’s location at no cost to you.
Need help?
Do you have a question about the Spot and is the answer not in the manual?
Questions and answers