Table of Contents
Advertisement
FAQ
■ Please check the following if the USB connection malfunctions.
[Case 1]
The camera power is off.
→ Turn the camera power on.
[Case 2]
USB Driver is not installed correctly.
→ Install the USB Driver correctly. Refer to page 99.
[Case 3]
The USB cable is not connected or you are using a cable with an incorrect
specification.
→ Use a USB cable with the correct specification.
[Case 4]
The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown Devices] in Device
Manager.
→ Install the camera driver correctly.
Turn off the camera, remove the USB cable, plug in the USB cable again, and
then turn on the camera.
[Case 5]
There is an unexpected error during file transfer
→ Turn the camera power off and on again. Transfer the file again.
《117》
Hide quick links:
Advertisement
Table of Contents
