Table of Contents
Advertisement
Before contacting a service centre
Camera does not take images when pressing the Shutter button
ㆍThere is insufficient memory capacity
→ Delete unnecessary image files
ㆍThe memory card has not been formatted
→ Format the memory card (p.82)
ㆍThe memory card is exhausted
→ Insert a new memory card
ㆍThe memory card is locked
→ Refer to [CARD LOCKED!] error message (p.91)
ㆍThe camera's power is off
→ Turn the camera power on
ㆍThe battery are exhausted
→ Insert fresh batteries.
ㆍBattery is inserted incorrectly with the polarities reversed
→ Insert the battery according to the polarity marks (+, -)
The camera suddenly stops working while in use
ㆍThe camera was stopped due to a malfunction
→ Remove /re-insert battery and switch the camera on
The images are unclear
ㆍA picture was taken within 0.8m from the subject without setting an appropriate macro mode
→ If the subject is closer than 0.8m, select macro shot mode
ㆍThe picture was taken with the subject beyond the flash range
→ Take a picture within the flash range
ㆍThe lens is smudged or dirty
→ Clean the lens
The flash does not fire
ㆍFlash off mode has been selected
→ Dis-engage flash off mode
ㆍThe camera mode can't use the flash
→ Refer to the FLASH instruction (p.33)
Incorrect date and time is displayed
ㆍThe date and time have been set incorrectly or the camera has adopted the default settings
→ Reset the date and time correctly
《93》
Hide quick links:
Advertisement
Table of Contents
