Pictbridge : Printing - Samsung DIGIMAX A40 User Manual

PictBridge : Printing

■Printing Pictures
1. Connect the camera to your printer.
The USB menu must be set to [PRINTER] after you
connect the camera to the printer.(See p.74)
2. Use the LEFT and RIGHT buttons to select the [PRINT]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[STANDARD]
[INDEX]
4. The screen shown on the right will appear and the
picture will be printed. If no picture is selected, the
[NO IMAGE!] message will be displayed. Press the
shutter button while printing to cancel the printing and
the [IMAGES] menu is displayed.
※ Number of pictures in a index print varies depends on
the printer used.
■DPOF PRINT : This allows you to directly print the files with DPOF information.
1. Connect the camera to your printer. The USB menu
must be set to [PRINTER] after you connect the camera
to the printer.(See p.74)
2. Use the LEFT and RIGHT buttons to select the
[DPOF PRINT] menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
[NO] : Cancel the printing
[YES]: Directly print the file with the DPOF information
※ Depending on the manufacturer and printer model, some menus may not be available.
With a printer without supporting the DPOF, the menu is still displayed but not available.
: Print the pictures stored in the memory card in set numbers.
One picture is printed on one piece of paper.
: Print multiple images on one sheet of paper.
PRINT
STANDARD
INDEX
MOVE:
▲▼
NOW PRINTING
001/001
EXIT:SH1
DPOF PRINT
NO
YES
MOVE:
▲▼
《77》