Faq - Samsung HZ50W Instruction Manual

FAQ

Please check the following if the USB connection malfunctions.
Case 1 USB cable is not connected or it is not the supplied USB
cable.
Connect the supplied USB cable.
Case 2 The camera is not recognized by your PC.
Sometimes, the camera may appear under [Unknown
Devices] in Device Manager.
Turn off the camera, remove the USB cable, plug in the
USB cable again, and then turn on the camera.
Case 3 There is an unexpected error during file transfer.
Turn the camera power off and on again. Transfer the file
again.
Case 4 When using a USB hub.
There may be a problem with connecting the camera to
the PC through the USB hub if the PC and the hub are
not compatible. Wherever possible, connect the camera
to the PC directly.
Case 5 Are other USB devices connected to the PC?
The camera may malfunction when it is connected to
the PC at the same time as another USB device. In this
case, disconnect the other USB device, and connect
only the camera to your PC.
116
Case 6 When I open the Device Manager (by clicking Start
(Settings) Control Panel
tenance) System
there are Unknown Devices or Other Devices entries
with a yellow question mark(?) beside them or devices
with an exclamation mark(!) beside them.
Right-click the entry with the question (?) or exclamation (!)
mark, and then select "Remove". Restart the PC and con-
nect the camera again.
Case 7 In some security programs (Norton Anti Virus, V3, etc.),
the computer may not recognize the camera as a remov-
able disk.
Stop the security programs and connect the camera to
the computer. Refer to the security program instructions
about how to temporarily disable the program.
Case 8 The camera is connected to the USB port located on
the front of the computer.
When the camera is connected to the USB port located
on the front of the computer, the computer may not
recognize the camera. Connect the camera to the USB
port located on the back of the computer.
(Performance and Main-
(Hardware) Device Manager),