Attaching And Detaching The Harmonica Covers - Suzuki SHINOBIX SNB-48CVS Instruction Manual

3-3. Attaching and Detaching the Harmonica Covers

Detach the covers when cleaning or adjusting the instrument, and when attaching the covers to
another harmonica.
Detaching
Detach the silencer from the harmonica.
1
« See "3-1. Attaching and Detaching the Silencer" (P. 26)
Loosen the cover screw and remove it. (Use a Phillips No.1 screwdriver)
2
Attaching
Slightly tighten the cover screws and attach the covers onto the harmonica.
1
The screw goes on the upper cover and the nut on the lower cover.
Attach the silencer before tightening the screw.
2
« See "3-1. Attaching and Detaching the Silencer" (P. 26)
Gently press the harmonica as shown in the illustration on the right, and adjust it to ensure
3
that a large gap does not appear between the silencer and the harmonica. Tighten the
screws after adjusting it.
Y The silencing effect will not function properly if a gap exists.
29
Press gently
Adjust it until the gap
gets smaller.