Mitsubishi MELFA SQ Series Standard Specifications Manual page 85

ｷｰｽｲｯﾁｲﾝﾀﾌｪｰｽ
KEY11
KEY12
KEY21
KEY22
The connection method of the electric wire
1) Push the terminal opening-and-closing lever with the minus driver etc., and open the terminal.
2) Insert the electric wire in the terminal. Insert certainly to the back.
3) Detach the terminal opening-and-closing lever.
The electric wire is connected.
Terminal opening-and-closing lever
Push the lever by the minus driver (recommendation size: 2.0-3.0mm) etc.,
and insert the electric wire in the terminal.
Terminal
Connect the electric wire.
Peel sheathing about 10mm.
Key switch extension cable (Only for the DU1A-772 drive unit)
Grounding cable
Notes) Connect the grounding cable
to the unpainted portion on
the operation panel which
prepared by customer.
Key switch
Operation panel which prepared
by customer
3 Controller