Table of Contents
Advertisement
WARNING: To prevent injury from accidental operation, turn OFF and unplug the tool from the power
source before assembling or making any adjustments to the tool.
INSTALLING THE SIDE HANDLE
(Fig. 1)
Install the side handle to guide and balance
the tool for safe operation. The reversible
handle can be threaded into the mounting hole
on either side of the tool, depending on your
preference.
When operating the tool, always hold on to the
side handle to prevent loss of control and/or
personal injury.
INSTALLING/ADJUSTING THE WHEEL GUARD (Fig. 2 & 3)
The wheel guard (Fig. 2 - 1) helps to protect the
operator from broken wheel fragments and accidental
contact with the grinding wheel. The guard MUST
be securely attached to the power tool and positioned
for maximum safety, so the least amount of wheel is
exposed towards the operator.
The position of the guard can be adjusted to accom-
modate the operation being performed.
1. To attach or adjust the wheel guard, first disconnect
the tool from its power supply.
2. Using a Phillips-head screwdriver (not included),
loosen the guard lock screw (Fig. 2 - 2) and position
the guard onto the spindle neck.
3. Rotate the guard to the desired position so that the
guard is between you and the wheel (Fig. 3). Tighten
the screw (Fig. 2 - 2) to secure the guard in place.
WARNING: Never have the guard opening
directed toward your body.
10
ASSEMBLY & ADJUSTMENTS
1
1
Fig. 1
2
Fig. 2
Fig. 3
Advertisement
Table of Contents
