Technical Data - Hoffmann PP2 Operating Manual

Hoffmann PP2 Dovetail Routing Machine
5. Potential Risks and Dangers
Even when the machine is used as designed, and when the aforementioned safety rules are
adhered to, the potential risk of injury must always be considered.
It is especially important to be aware of the following:
The risk of pinching between stationary and moveable parts of the machine.
The risk of pinching on the clamping devices of the machine.
The risk of injury from sharp edges when handling, adjusting or changing the tooling.
The risk of injury due to the inhalation of wood dust when operating the machine.
The potential risk of injury on the electrical parts of the machine.
The potential risk of injury on the pneumatic elements of the machine.
6. Toolkit
The machine is shipped with a Hoffmann toolkit, consisting of:
•
Hex key 2.5mm
•
Hex key 3.0mm
•
Hex key 4.0mm
•
Hex key 5.0mm
•
Hex key 6.0mm
•
Wrench 14mm
•
Wrench 17mm
•
Wrench 18mm
•
Wrench 22mm
•
One Safety Equipment Starter Kit (safety glasses, ear plugs, dust mask)
This starter kit is included as a courtesy to allow the machinery owner to start using this
machine upon receipt. It is the machine owner's responsibility to supply additional safety
equipment as needed, and the machine operator's responsibility to use all safety equipment as
instructed.

7. Technical Data

Electrical Supply
Router motors
Rotation
Revolutions per minute
Collet size
Compressed air supply
Dust collection:
Max. routing height
Max. material thickness:
Operating noise
Weight:
Dovetail Key sizes
Hoffmann Machine Company, Inc.
Phone: (828) 430 - 4510
- 4 -
120 Volt, 60 Hz, 17 Amps. - single phase
two Hoffmann brand motors, 1,000 Watt each
CCW (counter clockwise)
33,000 rpm (idle)
¼" = 6.35mm (8mm collet required for W-4 router bits)
90 psi = 6.0 bar
One 4" diameter duct, approx. 500 cfm required
4"
5 ¾"
75.3 dB (A)
348 lbs.
W-1, W-2, W-3, W-4
1386 Drexel Road
Fax: (828) 430 - 4620
www.Hoffmann-USA.com
Valdese, NC 28690
e-mail: info@Hoffmann-USA.com