Technical Data - Hoffmann MU2-P Operating Manual

Hoffmann MU2-P Dovetail Routing Machine
5. Potential Risks and Dangers
Even when the machine is used as designed, and when the aforementioned safety rules are
adhered to, the potential risk of injury must always be considered.
It is especially important to be aware of the following:
The risk of pinching between stationary and moveable parts of the machine.
The risk of pinching on the clamping devices of the machine.
The risk of injury from sharp edges when handling, adjusting or changing the tooling.
The risk of injury due to the inhalation of wood dust when operating the machine.
The potential risk of injury on the electrical parts of the machine.
The potential risk of injury on the pneumatic elements of the machine.
6. Toolkit
The machine is shipped with a Hoffmann toolkit, consisting of:
•
Hex key 2.5mm
•
Hex key 3.0mm
•
Hex key 4.0mm
•
Hex key 5.0mm
•
Hex key 6.0mm
•
Wrench 14mm
•
Wrench 17mm
•
One Safety Equipment Starter Kit (safety glasses, ear plugs, dust mask)
This starter kit is included as a courtesy to allow the machinery owner to start using this
machine upon receipt. It is the machine owner's responsibility to supply additional safety
equipment as needed, and the machine operator's responsibility to use all safety equipment as
instructed.

7. Technical Data

Number of motors
Motor type
Rotation
Revolutions per minute
Compressed air supply
Collet size
Max. routing height
Operating noise
Weight:
Dovetail Key sizes
Hoffmann Machine Company, Inc.
Phone: (828) 430 - 4510
- 4 -
one
115 Volt, 60 Hz, 750 watt (1,000 watt motor optional)
CCW (counter clockwise)
35,000 rpm (idle)
90 psi = 6.0 bar
¼" = 6.35mm, 8.0mm for W-4
3"
75.3 dB (A)
81 lbs.
W-1, W-2, W-3 / W-4 with optional 1,000 watt motor
1386 Drexel Road
Fax: (828) 430 - 4620
www.Hoffmann-USA.com
Valdese, NC 28690
e-mail: info@Hoffmann-USA.com