Table of Contents
Advertisement
Hoffmann PP2 Dovetail Routing Machine
13. Installation of fence extensions
If accessory fence extensions have been ordered with the machine please follow these assembly
instructions:
1. Push the left and right hand side fence with the steel connector plate (2) and bolt (1) into the
machine fence profile.
2. Tighten the screw (3) on the connector plate.
3. Attach the self-adhesive tape scale to the fence extension.
Proper line-up with the table scale is important!
14. Maintenance
A
LWAYS DISCONNECT THE ELECTRICAL POWER AND COMPRESSED AIR SUPPLY BEFORE ATTEMPTING
,
ANY SERVICE
MAINTENANCE OR REPAIR WORK
Follow proper "Lock-Out / Tag-Out" procedures as specified by the Occupational Safety and
Health Administration "OSHA".
•
All moving parts should be cleaned weekly and lubricated as necessary.
•
The cooling vents in the motor housing must be kept free from dust and debris.
•
Promptly replace damaged or worn router bits. Use only Original Hoffmann Dovetail Router
Bits for best performance.
•
All fasteners, nuts and bolts should be checked periodically and re-tightened as necessary.
•
Periodically check the machine for damage or unusual wear. Never operate the machine if
damaged.
•
Do not modify the machine. Any modification will void the warranty and may cause a
hazardous condition.
•
Remove condensation from the air filter assembly by opening drain on bottom of plastic
reservoir, as needed.
•
Re-fill oil reservoir with good quality air tool oil, as needed.
Set-screw should be adjusted to dispense one drop of oil approx. every 30-40 machining
cycles.
Hoffmann Machine Company, Inc.
Phone: (828) 430 - 4510
- 13 -
!
1386 Drexel Road
Fax: (828) 430 - 4620
www.Hoffmann-USA.com
Valdese, NC 28690
e-mail: info@Hoffmann-USA.com
Advertisement
Table of Contents
