National Instruments myDAQ 195509D-01L User Manual And Specifications page 49

Table 5. Texas Instruments Components in NI myDAQ (Continued)
Texas Instruments
Integrated Circuit (IC)
ADC
DAC
Reference
Tristate Buffer
Voltage Supervisor
Comparator
Operational Amplifier
Operational Amplifier
Audio Amplifier
Buffer
Switch
© National Instruments Corporation
Part
Number
ADS8319
DAC8551
REF3025
SN74AHCT1G125
TPS3809
TLV3491
TLE2082
OPA1642
TPA6110A2
SN74AUP1G17
TS12A44514
49
Description
This is a 16-bit, 500-kS/s analog-to-digital
converter.
This is a small, low-power, voltage output, 16-bit
digital-to-analog converter (DAC).
This is a precision, low power, low voltage
dropout voltage reference available in a small
SOT23-3.
This is a single bus buffer gate/line driver with
three-state output.
This is a supervisory circuit that provides circuit
initialization and timing supervision, primarily
for DSPs and processor-based systems.
This is a push-pull output comparator that
features a fast 6 s response time and <1.2 A
(max) nanopower capability, allowing operation
from 1.8 V–5.5 V.
This is an operational amplifier more than
double the bandwidth and triple the slew rate of
the TL07x and TL08x families of BiFET
operational amplifiers.
This is a JFET-input, ultra-low distortion,
low-noise operational amplifier, fully specified
for audio applications.
This is a stereo audio power amplifier packaged
in an eight-pin PowerPAD
capable of delivering 150 mW of continuous
RMS power per channel into 16 -loads.
This is a low-power Schmitt-Trigger buffer.
This is a low on-state resistance quad SPST
CMOS analog switch.
NI myDAQ User Guide and Specifications
™
MSOP package