National Instruments myDAQ 195509D-01L User Manual And Specifications page 46

Note For UL and other safety certifications, refer to the product label or the Online
Product Certification section.
Electromagnetic Compatibility
Note For EMC declarations and certifications, refer to the Online Product Certification
section.
CE Compliance
Online Product Certification
NI myDAQ User Guide and Specifications
Safety Standards
This product is designed to meet the requirements of the following
standards of safety for electrical equipment for measurement, control,
and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
Hazardous Locations
The NI myDAQ device is not certified for use in hazardous locations.
This product meets the requirements of the following EMC standards for
electrical equipment for measurement, control, and laboratory use:
• EN 61326-1 (IEC 61326-1): Class B emissions; Basic immunity
• EN 55011 (CISPR 11): Group 1, Class B emissions
• AS/NZS CISPR 11: Group 1, Class B emissions
• FCC 47 CFR Part 15B: Class B emissions
• ICES-001: Class B emissions
This product meets the essential requirements of applicable European
Directives as follows:
• 2006/95/EC; Low-Voltage Directive (safety)
• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)
To obtain product certifications and the Declaration of Conformity (DoC)
for this product, visit
ni.com/certification
or product line, and click the appropriate link in the Certification column.
46
, search by model number
ni.com