elero Invio-868 Operating Instructions Manual

elero Invio-868 Operating Instructions Manual

Hide thumbs Also See for Invio-868:

Advertisement

Quick Links

elero GmbH
Antriebstechnik
Linsenhofer Str. 59–63
D-72660 Beuren
info@elero.de
www.elero.com
309304 00
Invio-868
Operating instructions
GB
Please take care of the operating instructions!
Nr. 18 100.4901/0405
elero

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Invio-868 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for elero Invio-868

  • Page 1 Invio-868 Operating instructions Please take care of the operating instructions! elero GmbH Antriebstechnik Linsenhofer Str. 59–63 D-72660 Beuren info@elero.de www.elero.com 309304 00 Nr. 18 100.4901/0405...
  • Page 2: Table Of Contents

    Approach intermediate position ....GB- 7 • Only use unmodified original elero electrical parts. Approach ventilation/turning position ..
  • Page 3: Explanation Of Buttons And Display

    A venetian blind switch and/or a ProLine device can be connected to the Invio-868 radio transmitter. elero Intended use Terminals for The Invio-868 must only be used for controlling roller shutter, ProLine awning and blind systems. devices • Please ensure that the radio installations are not operated in areas of heightened possible interference.
  • Page 4: Installation/Connection

    230V/50Hz 5 minutes. Single Central L L N 2. Now press the P key on the Invio-868 or on a manual transmitter. Mains Venetian blind switch The receiver will now be in ready-to-program mode. 3. In order to define the key assignment, immediately after the start of upward travel (1 sec.) press the UP key on the switch or...
  • Page 5: Intermediate Position/Ventilation Position

    Intermediate positions/ventilation position Deletion of transmitter Intermediate positions/ventilation position Deletion of transmitter The Invio-868 can only be deleted with a programmed manual The intermediate or ventilation/turning position can only be transmitter programmed with a ProLine control device or a manual transmitter.
  • Page 6: Technical Data

    Incorrect direction has Delete transmitter the wrong direction. been programmed. and program correctly. General conformity declaration: Herewith the company elero GmbH declares that the Invio-868 device satisfies the basic requirements and other relevant regulations of the 1999/5/EC guidelines. GB-9 GB-10...

Table of Contents