• If one or more transmitters are used for controlling the achieved. system, its operating range must stay visible during elero GmbH assumes no liability for personal injuries, property operation. damages and financial losses that arise from non-observance of • Keep children away from the control units.
Manufacturing note What does bidirectional radio system mean? All the ProLine 2 transmitters are subject to 100% testing by elero A bidirectional radio system is one that carries out the reliable GmbH before delivery. transmission of radio signals to a radio receiver and provides feedback from the radio receiver to the transmitter.
Safety instructions for radio operation Mounting of the wall bracket C A U T I O N ! N O T I C E ! The wall bracket has to be fixed so that the drill Observe the following safety instructions for radio holes don’t touch any electrical lines.
Explanation of functions Programming the transmitter Status LED Programming the transmitter A radio signal is displayed by the illumination of the Status LED P R E R E Q U I S I T E ! (LED ring around the STOP button). The receiver must be installed.
Page 7
Approach limit positions Programming additional transmitters Roller shutter/awning/venetian blind Programming additional transmitters P R E R E Q U I S I T E ! N O T I C E ! The transmitter/transmitter channel has been programmed. If several receivers are connected to the same feed The end positions of the drive have been set.
Intermediate positions for roller shutters/ Intermediate positions for roller shutters/ awnings/venetian blinds awnings/venetian blinds Program ventilation/tilting position Roller shutters Awning Venetian blind P R E R E Q U I S I T E ! The transmitter/transmitter channel has been programmed.
Delete transmitter/technical data Delete positions Delete intermediate position Delete transmitter/channel 1. Press the STOP button and also the DOWN button. 1. Press the STOP button and also the programming button P 2. Hold down this button combination for approx. 3 sec. (back of unit).
Clean the device with a damp cloth. events Don’t use any cleaning agents. This may attack the plastic. Repair address: Disposal elero GmbH Antriebstechnik Please observe the current national regulations. Dispose of Linsenhofer Straße 59–63 according to the condition and existing regulations.
Need help?
Do you have a question about the monotel 2 28 205.0001 and is the answer not in the manual?
Questions and answers