elero LumeroTel 2 Operating Instructions Manual

elero LumeroTel 2 Operating Instructions Manual

867/868/915 mhz

Advertisement

LumeroTel 2 867/868/915 MHz
28225.0001, 28226.0001,
28227.0001, 28225.0901,
28226.0901, 28227.0901
Operating instructions (translation)
181220101_EN_0614

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LumeroTel 2 and is the answer not in the manual?

Questions and answers

Summary of Contents for elero LumeroTel 2

  • Page 1 LumeroTel 2 867/868/915 MHz 28225.0001, 28226.0001, 28227.0001, 28225.0901, 28226.0901, 28227.0901 Operating instructions (translation) 181220101_EN_0614...
  • Page 2: Table Of Contents

    Address ........20 • Observe all regulations for installation . 2 | EN © elero GmbH © elero GmbH EN | 3...
  • Page 3: Safety Instructions

    Operation with elero radio receivers . Other uses or use going beyond this is • Use only in dry rooms . considered to be contrary to the intended use .
  • Page 4: Mounting Of Wall Bracket

    . 5 DOWN button 6 Select button Rear of the device 7 Programming button P Only for experts: 8 DIP switch 1 9 DIP switch 2 6 | EN © elero GmbH © elero GmbH EN | 7...
  • Page 5: Explanation Of Functions

    . battery output . No more functions are executed and there is no display if the voltage drops below 2 V . 8 | EN © elero GmbH © elero GmbH EN | 9...
  • Page 6: Programming The Transmitter

    The receiver is now in programming mode for about 5 minutes . STOP button briefly on a transmitter that has already been programmed . The programming mode in the receiver is interrupted . 10 | EN © elero GmbH © elero GmbH EN | 11...
  • Page 7: Synchronized Programming Mode

    10 The transmitter/transmitter channel is programmed . The end programmed receivers . positions of the drive have been set . 12 | EN © elero GmbH © elero GmbH EN | 13...
  • Page 8 1 . Press the DOWN button twice briefly. The status display lights up briefly. 2 . The curtain travels to the stored intermediate position . In the case of Venetian blinds, the slats turn automatically after 14 | EN © elero GmbH © elero GmbH EN | 15...
  • Page 9: Operation Of The Transmitter Using Combio Ja Pulse

    DIP switch 2 on the rear of the device, beneath the cover: switch up: OFF (bidirectional and unidirectional operation possible, preset), switch down: ON (only bidirectional operation is possible) . DIP switch 1: OEM setting . 16 | EN © elero GmbH © elero GmbH EN | 17...
  • Page 10: Replacing The Battery

    • Unusual events occurring prior to fault • Accompanying conditions Dispose of the device in accordance with the relevant regulations • Own suspicion when you no longer need it . 18 | EN © elero GmbH © elero GmbH EN | 19...
  • Page 11: Ec Declaration Of Conformity

    EC Declaration of conformity EC Declaration of conformity elero GmbH hereby declares that the LumeroTel 2 complies with the fundamental requirements and other relevant provision of the EC directives 2014/53/EU . The complete declaration of conformity is located in the download area of our website www.elero.com/en/ downloads-service/ or can be requested at the address given .

Table of Contents