Philips Norelco SP9860 Manual page 25

5 Remove the shaving heads from the
shaving head holder. Each shaving head
consists of a cutter and comb.
Note: Do not clean more than one cutter
and comb at a time, since they are all
matching sets. If you accidentally put a
cutter in the wrong shaving comb, it may
take several weeks before optimal shaving
performance is restored.
6 Clean the cutter and comb with lukewarm
water.
7 Shake off excess water.
8 Put the cutter back into the comb.
9 Place the shaving heads in the shaving
head holder.
10 Place the retaining ring on the shaving
1
head.
2
11 Align the arrows on the retaining ring with
the projections in the shaving head holder.
Turn the ring clockwise until it clicks to
indicate that the ring is fixed.
25
English