Philips Norelco SP9860 Manual page 12

12
English
Notification symbol
beeps, the replacement reminder lights up,
and the arrows flash to indicate that you have
to change the shaving heads.
Note: After replacing the shaving heads, you
can reset the replacement reminder by
pressing the on/off button for 7 seconds. If you
do not reset the replacement reminder, the
shaver resets automatically after 9 shaves.
Overheating
If the shaver overheats during charging, the
notification symbol flashes. When this
happens, the shaver automatically stops
charging. Charging continues once the
temperature of the shaver has decreased to
the normal level after approx. 10 minutes.
Blocked shaving heads
If the shaving heads are blocked, the
notification symbol continuously lights up red.
The replacement reminder and the cleaning
reminder alternately flash white and the
shaver beeps. In this case, the motor cannot
run because the shaving heads are dirty or
damaged. If the shaving heads are dirty, you
have to clean them. If the shaving heads are
damaged, you have to replace them.