Connection And Pre-Heating - Rowenta EVIDENCE-GRILL PRELUDE GC500111 Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 28
EVID-GRILL-2016273231
se, inappropriate
To grill food and make sandwiches, panini, etc.
d the guarantee
• Place the juice tray under the plate to collect the juice that may run off
e, Electromagnetic
• Set the thermostat according to the instructions in the cooking table
• Close the appliance.
thout prior notice.
For the barbecue function
To grill meat and vegetables at the same time.
• Place the juice tray under the plate to collect the juice that may run off
• Opening the grill :
- push the blocking button up
- take the handle, rotate the upper part while holding the blocker button up -
- release the blocker button and then open the appliance at 180°
- the appliance is completely open

Connection and pre-heating

• Fully unwind the power cord.
• Make sure that the electric power supply is compatible with the power rating and voltage indicated on the bottom of
the appliance.
• Always plug the appliance into an earthed socket.
• If an extension cord is used:
- make sure to choose an extension cord of equivalent diameter with an earthed socket,
- take all necessary precautions to prevent anyone tripping over an extension cord.
liance.
If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qua-
lified person in order to avoid a hazard.
This appliance is not intended to be operated by means of an external timer or separate remote-control system.
oft surface such as
• Set the thermostat to the position indicated in the cooking table
The position of the thermostat during pre-heating is the same as that used for cooking.
• Plug the cord into the mains: the appliance is switched on.
y around the table
The red indicator light comes on and the appliance starts to heat up
The green light goes out and lights up again regularly during the cooking process, to show that the selected tempe-
etc.).
rature is maintained.
materials such as
Never plug the appliance in without putting the 2 cooking plates in place.
Never run the appliance empty.
• Pre-heat the appliance for about 5 minutes. Pre-heating has finished when the green indicator light comes on
To preserve the non-stick properties of the coating, avoid excessive pre-heating with the appliance empty.
plate(s) and wipe
On first use, there may be a slight odour and a little smoke during the first few minutes.
Never leave the appliance unattended when in use.
Cooking
- 2a
pliance
- then
• After pre-heating, the appliance is ready for use.
3a
pliance -
- then
To preserve the non-stick properties of the coating:
- as a preference, use a wooden spatula to turn the food over,
he plates provided
- never cut food directly on the plates,
- do not cook food in aluminium foil.
12/05/09
15:23
- 7 7 a a
- 7 7 d d
Page 29
For the grill function
- 4
- 5
- 4
7 7 b b
- 7 7 c c
- 5
- 6
GB
- 6
29

Advertisement

Table of Contents
loading

Table of Contents