Advertisement
Available languages
Available languages
AirBath Remote Synchronization Instruction
When is synchronization needed?
It is possible that the remote has lost synchronization when it does not respond properly.
Synchronization is needed when the remote is replaced or when the blower/controller is re-
placed.
1
Remove and restore power
This can be done by unplugging the blower/controller and re-connecting it. This can also be
done by switching off the circuit breaker and switching it on again.
NOTE: Using the On/Off button on the remote will not accomplish this step.
Press and hold increase blower and decrease blower
2
The increase blower and decrease blower buttons need to be pressed simultaneously and held
down for 4 seconds.
NOTE: This must be done within 15 seconds after restoring power.
Repeat steps 1 and 2 if needed
3
After steps 1 and 2 are complete the remote should work correctly. If not repeat the steps.
0GU5085, V.01
Remote
ON/OFF
INCREASE
BLOWER
DECREASE
BLOWER
MODE
LED
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Toto Soiree ABR964S N Series
Summary of Contents for Toto Soiree ABR964S N Series
- Page 1 AirBath Remote Synchronization Instruction Remote When is synchronization needed? It is possible that the remote has lost synchronization when it does not respond properly. ON/OFF Synchronization is needed when the remote is replaced or when the blower/controller is re- placed. INCREASE BLOWER DECREASE...
- Page 2 Instrucciones para la sincronización remota del Remoto hidromasaje ¿Cuándo es necesario realizar la sincronización? ENCENDIDO/ APAGADO Es probable que el control remoto no esté sincronizado cuando no funciona correctamente. Es necesario realizar la sincronización cuando se reemplaza el control remoto o la turbina/el AUMENTAR regulador.
- Page 3 Instructions pour la synchronisation à distance Télécommande du système AirBath MARCHE/ Quand la synchronisation est-elle nécessaire ? ARRÊT Lorsque la télécommande ne fonctionne pas correctement, il est possible qu’elle ne soit plus synchronisée. La synchronisation est nécessaire lors du remplacement de la télécommande ou du ventila- AUGMENTER teur/contrôleur.
Need help?
Do you have a question about the Soiree ABR964S N Series and is the answer not in the manual?
Questions and answers