Summary of Contents for Planika Fire Line Automatic 3
Page 1
USER’S MANUAL Fire Line Automatic 3 Manufactured by Planika Sp. z o.o. ul. Bydgoska 38 86-061 Brzoza Poland I0773#02 of 24.07.2014 Copyright Planika Sp. z o.o. www.planikafires.com...
If that happens the appliance will not work until the liquid evaporates. WARNING! The first run can be made only after proper installation of the device and reading • the manual instructions! Copyright Planika Sp. z o.o. www.planikafires.com...
Control panel START STOP PAT. PEND. USB port hidden under a flap reduces flame level increases flame level control panel display Control panel display Fuel level indicator Flame size indicator Copyright Planika Sp. z o.o. www.planikafires.com...
If 5L containers are used to fill up, twist on the cap with the tap onto the container and pour the • fuel using the funnel. To fill up use exclusively accessories provided by the manufacturer. Copyright Planika Sp. z o.o. www.planikafires.com...
Page 6
5. PLEASE WAIT message – you need to wait a moment as it takes a few seconds for the appliance to ignite the flame. 6. WORKING message – the device is in working mode. Copyright Planika Sp. z o.o. www.planikafires.com...
NO FUEL message visible on the display - start the procedures as in point 3 of this manual. READY message visible on the display – start the procedures as in point 4 of this manual. Switching off To switch off the device completely press the red button on the control panel. Copyright Planika Sp. z o.o. www.planikafires.com...
You can refill the fuel or close the bolt and start the The filler bolt is open. device. FUEL Protection against too fast Wait until the device cools down. The message will COOLING restart of the hot device is change to READY THE DEVICE active. Copyright Planika Sp. z o.o. www.planikafires.com...
Page 9
Switch off the device using the red button on the control The device is tilted (set on a panel. Level the surface on which the device stands and ERROR 15 non-levelled surface). restart the device. Copyright Planika Sp. z o.o. www.planikafires.com...
1) Lock the device This function allows to lock the device in order to avoid being manipulated by unauthorized persons. To turn this function on press ‘-‘ on the control panel. This screen appears: Copyright Planika Sp. z o.o. www.planikafires.com...
Page 11
‘-‘ button. Do the same to set minutes and date, using ‘+’ for choosing the appropriate numbers and ‘-‘ for confirming them. When setting finished, the device will automatically come back to the main display with already visible hour. Copyright Planika Sp. z o.o. www.planikafires.com...
Page 12
Using ‘+‘ button choose OFF option and confirm with ‘-‘ button. The device automatically returns to main display and ‘Fast start’ function will be turned off. To restart this function choose ON option in menu of ‘Fast start’ function. Copyright Planika Sp. z o.o. www.planikafires.com...
The manufacturer does not foresee a situation where it will be necessary to clean elements not normally available. The manufacturer is not liable for damage resulting from: improper operation (disobeying rules included in User’s Manual) self-dismantling attempts to modify using fluids other than the recommended FANOLA ®. Copyright Planika Sp. z o.o. www.planikafires.com...
Moreover, dispose of the empty Fanola containers to plastic waste baskets. Most of the materials used in Planika appliances can be recycled. ------------------------------------------------------------------------------------------------------------------------------------- If you have technical problems or other questions that require clarification, please contact your dealer.
Need help?
Do you have a question about the Fire Line Automatic 3 and is the answer not in the manual?
Questions and answers