Download Print this page

Samsung VC-U366 Operating Instructions Manual

Advertisement

Quick Links

Vacuum
Cleaner
For Household
use Only
Operating
Instructions
Read these instructions before operating the vacuum cleaner
※The design and specification may be different depending on the models.
Register your product at www.samsung.com/global/register

Advertisement

loading

Summary of Contents for Samsung VC-U366

  • Page 1: Vacuum Cleaner

    Vacuum Cleaner For Household use Only Operating Instructions Read these instructions before operating the vacuum cleaner ※The design and specification may be different depending on the models. Register your product at www.samsung.com/global/register...
  • Page 2 S a f e t y I n s t r u c t i o n s Thank you for purchasing a Samsung vacuum cleaner. When using an electrical appliance, basic precautions should always be followed, including the following:...
  • Page 3: Assembled Vacuum Cleaner Parts

    Assembled Vacuum Cleaner Parts The assembled cleaner will look like the illustration to the left. Crevice Tool Upper Tank Knob Extension Wand Dusting Brush WARNING! OPERATE THE VACUUM CLEANER ONLY AT THE VOLTAGE SPECIFIED ON THE NAMEPLATE. 1. How to put it together. Step 1.
  • Page 4 2. How to use you samsung vacuum ON-OFF Switch 1.To turn cleaner ON(I), press the ON/OFF switch to the ON position. 2.To the cleaner OFF(O), press the ON/OFF switch to the OFF position. Carrying handle The cleaner can also be moved by using the carrying handle.
  • Page 5 Move cleaner back to start again, lower front of cleaner, and use only forward strokes. 3. How to maintain youer samsung vacuum Empty Dirt Container The Dirt Container needs to be emptied when the dirt reaches the “Full”...
  • Page 6 Note: For easier access, the entire Upper Tank may be removed by turning the knob on the back of the cleaner to unlock and pulling the entire tank straight out. The belt The belt on your cleaner causes the agitator to rotate and is important for the effective operation of the cleaner.
  • Page 7 3-10 Grasp agitator firmly and fit it into position by first sliding the end opposite the belt into the rectangular slot (F) on side of cleaner. Pull other side of agitator (G) into place. Turn agitator, making sure belt is not pinched between agitator and agitator shield.
  • Page 8 · · Adjust Powerfoot to correct height setting Remedies · · Empty Dirt Container · · Check Upper Tank, Pre-Motor and Post-Motor Filters for correct installation · · Pull out and re-insert Dirt Container correctly 0870-SAMSUNG(726-7864) DJ68-00148F REV ( 0.2 )