Advertisement
All the instructions or operations described here are to be to be carried out on the
To begin the hood should
switch supply point is not close enough to the hood, and in a remote location, that cannot
be physically be reached by the operator the while at the hood, then help will be required
to further complete this instruction.
To
enter the parameter
1) Hold down the minus button (-) on the hood control fascia, while switching the
power supply on at the socket.
Display will show
' SE'
2) When
displays immediately
Display shows 'Rotating squares'
3) Now press and hold for two (2) seconds the 24 hr button. Just once.
Be aware that further depresions of this button will
4)
The display window will show
The remote control is now active,
NB
Please note the following:
i.
There is
no visible sign
users point of view. No flashing lamp.
ii.
The activation of a hood function by remote control, may take several (approx 5)
seconds to be decoded by the hood. Keep the selected function button on the
remote control pressed.
results at the touch of a button. Please be patient.
Hood control panel
not
have a mains electrical supply connected, though if the
to activate the remote control,
'SO'
'SE' (immediately release the minus (-) button.)
then
release
from the remote control, of infrared operation, from the
Unlike a television remote control that gives instant
the minus (-) button.
deactivate
twice!
the remote control.
Advertisement
Table of Contents
Related Manuals for Franke FTU 3807-P XS 70H
Summary of Contents for Franke FTU 3807-P XS 70H
- Page 1 All the instructions or operations described here are to be to be carried out on the Hood control panel To begin the hood should have a mains electrical supply connected, though if the switch supply point is not close enough to the hood, and in a remote location, that cannot be physically be reached by the operator the while at the hood, then help will be required to further complete this instruction.
- Page 2 For infrared operation there must be a clear line of sight between the remote control and the hood control fascia, or display, or other receiver as described in the user instruction book. Only two operations can be selected from the remote control when the hood is off. 1) The 24 hour function can be activated, press and hold the button approximately 3 seconds.
Need help?
Do you have a question about the FTU 3807-P XS 70H and is the answer not in the manual?
Questions and answers