Maintenance - Philips FW-V39 Manual

All manuals and user guides at all-guides.com
TIMER
5 Press CLOCK•TIMER to store the start
time.
™ The timer is now set.
™ The TIMER flag remains on the
display.
• At the preset time, the timer will be
activated.
™ The selected source will be played.
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
– If the source selected is TUNER, the last
tuned frequency will be switched on.
– If the source selected is VCD, playback
will begin with the first track of the disc
tray 1 or other trays if disc tray 1 is
empty. If all the disc trays are empty, the
TUNER will be selected instead.
– The timer will not activate if a recording
is in progress.
pg 01-28/V39/21-En 25

MAINTENANCE

To switch off the TIMER
Maintenance
1 Press and hold CLOCK•TIMER for more
Cleaning the Cabinet
than 2 seconds .
• Use a soft cloth slightly moistened with
2 Press Ç on the system to cancel the
a mild detergent solution. Do not use a
timer.
solution containing alcohol, spirits,
™ The timer is now switched off.
ammonia or abrasives.
™ The display will show "CANCEL"
and the TIMER flag disappears.
Cleaning Discs
• When a disc becomes
To start the TIMER again (for the same
dirty, clean it with a
preset time and source)
cleaning cloth. Wipe
1 Press and hold CLOCK•TIMER for more
the disc from the
than 2 seconds .
center out.
2 Press CLOCK•TIMER again to store the
• Do not use solvents
start time.
such as benzine,
™ The timer is now on.
thinner, commercially available cleaners,
™ The TIMER flag appears on the
or antistatic spray intended for analog
display.
records.
Cleaning the disc lens
• After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure
good playback quality, clean the disc
lens with Philips CD Lens Cleaner or any
commercially available cleaner. Follow
the instructions supplied with cleaner.
Cleaning the Heads and the Tape Paths
• To ensure good recording and playback
quality, clean the heads, the capstan(s),
and pressure roller(s) after every 50
hours of tape operation.
• Use a cotton swab slightly moistened
with cleaning fluid or alcohol.
• You can also clean the heads by playing
a cleaning tape once.
Demagnetizing the heads
• Use a demagnetizing tape available at
your dealer.
6/8/01, 9:02 AM
25
3139 116 19982