Page 1
VCD Mini Hi-Fi System Video CD version 2.0 3139 116 19982 pg 01-28/V39/21-En 6/8/01, 9:00 AM...
Page 2
MPEG-1 decoding and video encoding in the signal processing stages, are now the only limiting factors for picture quality. ® ErCoS is a registered trademark of Philips Electronics N.V. 6/8/01, 9:00 AM 3139 116 19982...
Page 3
English ...4 ...29 Bahasa Melayu ...53 CLASS 1 LASER PRODUCT 3139 116 19982 pg 01-28/V39/21-En 6/8/01, 9:00 AM...
CONTENTS GENERAL INFORMATION General Information ... 5 PLEASE NOTE THAT THE Safety Information ... 5 VOLTAGE SELECTOR LOCATED AT THE REAR OF Preparation ... 6 - 7 THIS SYSTEM IS PRESET AT 220V FROM THE FACTORY. Controls ... 8 - 10 FOR COUNTRIES THAT Operating The System ...
PREPARATION Rear Connections STANDBY ON CUT OFF FREQUENCY HIGH POWER SUBWOOFER 60Hz 150Hz pg 01-28/V39/21-En surr. surr. FM AERIAL FRONT REAR 75‰ SURROUND AM ANTENNA — — — — VOLTAGE VOLTAGE SELECTOR SELECTOR 220V- 110V- 240V 127V 220V- 110V- 240V 127V MAINS SUBWOOFER...
A AM Loop Antenna Connection Connect the supplied loop antenna to the AM ANTENNA terminal. Place the AM loop antenna far away from the system and adjust its position for the best reception. CAUTION: – For optimal sound performance, it is B FM Wire Antenna recommended to use the supplied Connection...
CONTROLS DISC 1 DISC CHANGE C H A N G E R VCD MINI HIFI SYSTEM STANDBY-ON C D 1 • 2 • 3 CONTROL PAL/NTSC ALBUM SEARCH•TUNING PROGRAM RECORD DUBBING A.REPLAY MICROPHONE - LEVEL OPEN TAPE 1 • pg 01-28/V39/21-En DISC 2 DISC 3 OPEN •...
Page 9
8 MICROPHONE Controls on the system and – to connect microphones jack. remote control 9 MIC LEVEL – to adjust the mixing level for karaoke 1 STANDBY ON or microphone recording. – to switch the system on or to standby 0 RECORD mode.
CONTROLS ¤ KEY CONTROL ( I È i ) ¡ n – to connect headphones. – to change the key to suit your vocal ™ CLOCK•TIMER range (for VCD operation only) . I ... to decrease vocal key – to view the clock, set the clock or set the timer.
VCD MINI HIFI SYSTEM STANDBY-ON CD1 • 2 • 3 BAND TAPE 1 • 2 CONTROL TUNER TAPE PAL/NTSC ALBUM MP3-CD TITLE SEARCH•TUNING STOP• CLEAR PLAY• PAUSE PREV PRESET INCREDIBLE PROGRAM RECORD DUBBING A.REPLAY SURROUND MICROPHONE - LEVEL RETURN CLOCK•TIMER Important: To stop the demonstration mode Before you operate the system,...
OPERATING THE SYSTEM DIM 3 - half brightness with Spectrum DIM mode Analyzer Off and all LEDs on the You can select the desired brightness for system will be switched off. the display. • Press DIM to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode.
DISC 1 DISC 2 DISC 3 DISC CHANGE C H A N G E R VCD MINI HIFI SYSTEM STANDBY-ON C D 1 • 2 • 3 BAND TAPE 1 • 2 CONTROL TUNER TAPE PAL/NTSC ALBUM MP3-CD TITLE SEARCH•TUNING STOP•...
Page 14
CD / VCD / MP3-CD Playing a normal disc Disc Change For normal VCD: You can change the outer two discs while Ensure that the system is switched to the third inner disc is stopped or is playing. the corresponding PAL or NTSC 1 Press DISC CHANGE.
Page 15
5 Press PROGRAM to store the track. Programming Tracks • Repeat steps 4 to 5 to store other Programming tracks of a loaded disc is tracks. possible when playback is stopped. The 6 Press Ç once to end programming. display will indicate the total tracks stored ™...
Page 16
CD / VCD / MP3-CD SINGLE ELAPSED VIDEO CD PLAY Adjusting the TV System Notes: – "XX" is the current track. Before viewing the Video CD, ensure that – "TT" is the total tracks. the set is switched to corresponding PAL or –...
Page 17
3 Press A-B once more to return to Zoom normal playback. This feature enables you to view a still ™ "CLEAR AB" appears on the picture frame in an enlarge mode. display. After you have pressedÉ Å to have a still Notes: picture on the TV screen.
CD / VCD / MP3-CD Echo MP3 Disc This feature allows you to add echo while singing or talking through a microphone. Album • Press ECHO -/+ to decrease or This feature allows you to view and select increase the echo effect. the next or previous MP3-CD Album when ™...
Page 19
Manual programming Storing Preset Stations 1 Press TUNER (BAND). You can store up to 40 radio stations in the 2 Press TUNER (BAND) again to select memory. When a preset radio station is the desired waveband : FM or MW. selected, the preset number appears next 3 Press PROGRAM for less than one to the frequency on the display.
TAPE VCD MINI HIFI SYSTEM STANDBY-ON C D 1 • 2 • 3 BAND TAPE 1 • 2 CONTROL TUNER TAPE PAL/NTSC ALBUM MP3-CD TITLE SEARCH•TUNING STOP• CLEAR PLAY• PAUSE PREV PRESET INCREDIBLE PROGRAM RECORD DUBBING A.REPLAY SURROUND MICROPHONE - LEVEL RETURN CLOCK•TIMER OPEN...
TAPE During playback • Press and hold à or á until the desired passage is located. ™ “T1 or T2” with “11 or 22”" scrolling left or right will be displayed depending on which button is pressed. ™ During searching, the sound is reduced to a low volume.
KARAOKE MICROPHONE - LEVEL Microphone Mixing 1 Set the MIC LEVEL control to the minimum level to prevent acoustic feedback (e.g. a loud howling sound) before you connect the microphone. 2 Connect a microphone to the MICROPHONE socket. 3 Press VCD, TUNER, TAPE or AUX. 4 Play the selected source.
Page 23
Notes: Recording the mixed sound / – If you do not intend to record via the One Touch Recording microphone, unplug the microphone to • During microphone mixing, you can avoid accidental mixing with other record the mixed sound on a tape in recording source.
CLOCK VCD MINI HIFI SYSTEM STANDBY-ON CD1 • 2 • 3 BAND TAPE 1 • 2 CONTROL TUNER TAPE PAL/NTSC ALBUM MP3-CD TITLE SEARCH•TUNING PLAY• PAUSE PREV STOP• CLEAR PRESET PROGRAM RECORD DUBBING A.REPLAY MICROPHONE - LEVEL RETURN View Clock Clock Setting You can view the clock (if it is set) if the The clock can be set in either 12- or 24-...
• After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. 6/8/01, 9:02 AM...
“NO DISC” is displayed. Warning! Under no circumstances should you try to repair the set • There is no disc in the disc tray. yourself as this will invalidate the ™ Insert a disc. guarantee. Do not open the set as No picture on TV screen.
TROUBLESHOOTING Lack of bass sound or apparently General imprecise physical location of musical System does not react when any instruments. button is pressed. • Speakers are connected wrongly. • Electrostatic discharge. ™ Check the speaker connection for ™ Press STANDBY ON to switch the proper phasing, colored/black wires to system off.