Table of Contents
Advertisement
.
End display to exit the operation
* .
no- - dynamic display No signal received.
20
VII. Operating Instructions
Notes:
Please Check if there is any damaged parts or not before safe use.
Install the battery as required in the manual
1. Testing Instructions
(1) Power On/Off
Press POWER to power on, display LCD and enter into general
measuring mode. You should change the battery if dark LCD appears after
power on and may be caused by low battery voltage. To conserve power
energy, the meter will automatically switch off 15 minutes later after power
on, indicated by 30 seconds of LCD flashing. And you can continue
operations by pressing POWER button to stop LCD flashing.
Press POWER button to switch off under HOLD mode
21
Advertisement
Table of Contents
Need help?
Do you have a question about the UT255A and is the answer not in the manual?