Setting The Volume - Silvercrest HG04522A-US-TX Manual

indicator will flash up. The receiver
1
will now indicate the door signal
acoustically and optically. Press the
signal type selector button again.
4
An acoustic signal will sound. The
receiver will now indicate the door
signal acoustically. Press the signal
type selector button again. The
4
receiver will now indicate the door
signal optically.
When the battery of receiver is
drained, the signal indicator will
flash. You can replace the used
battery with a new one of the same
type.

Setting the volume

Press the volume button until the
3
desired volume is reached. There
are a total of 4 possible volume set-
tings: very loud, loud, medium, soft.
26 US-EN
326419_1901_silv_Wireless Tuerklingel_Content_US.indd 26 24.06.19 13:45