Preparing For Use; Inserting / Replacing The Batteries - Silvercrest HG04522A-US-TX Manual

Preparing for use

Inserting / replacing
the batteries
Insert the batteries to provide power
to the product before preparing it
for use.
Use the indicated battery types only.
Failure to observe this advice may
result in product damage.
RISK OF EXPLOSION IF BAT-
TERY IS REPLACED BY AN IN-
CORRECT TYPE.
Receiver:
Remove the battery compartment
cover from the back of the
7
product.
Remove the used batteries, if present.
Insert 2 batteries (1.5 V (direct
current), type AA).
22 US-EN
326419_1901_silv_Wireless Tuerklingel_Content_US.indd 22 24.06.19 13:45