JUMO CEROS S01 M Interface Description page 27

4 PC software
To use the Diagnosis mode (1), you can choose either a 0 V or 5 V output signal of the analog output.
Temperature limits
If the Diagnosis mode is not deactivated, analog output enters the choosen diagnosis mode by exceed
the temperature limits. Use the text fields Lower temperature limit (2) and Upper temperature limit
(3) to enter the switching threshold values.
Example:
Diagnosis mode: 0 V Diagnosis mode: 5 V
NOTE!
If changes have been made, the data must be transferred to the sensor via the Write sensor button.
27