Measuring; Connecting With Sensor - JUMO CEROS S01 M Interface Description

4.5

Measuring

4.5.1

Connecting with sensor

1. Connect the digital pressure measuring cell to the PC software via the
in the Sensor - Quick info window.
After successfully connecting the digital pressure measuring cell and PC software, Part number (1) and
Serial number (2) of the sensor are displayed in the Sensor - Quick info window.
The Measuring dialogue box displays the current process values Temperature (3) and Pressure (4)
and in addition, the Status (5) indicates the functionality of the digital pressure measuring cell.
NOTE!
If the Status shows an error:  chapter 4.11 "Error messages", Page 32
4 PC software
button
21