Table of Contents
Advertisement
4 PC software
Process diagnosis analog output
To use the Diagnosis mode (1), you can choose either a 0 V or 5 V output signal of the analog output.
Overload limits
If the Diagnosis mode is not deactivated, analog output enters the choosen diagnosis mode by exceed
the overload limits. Use the text fields Lower overload limit (2) and Upper overload limit (3) to enter
the switching threshold values.
Example:
Diagnosis mode: 0 V
NOTE!
If changes have been made, the data must be transferred to the sensor via the Write sensor button.
26
Diagnosis mode: 5 V
Advertisement
Table of Contents
