Pc Software; Brief Description; Installation; Hardware And Software Requirements - JUMO CEROS S01 M Interface Description

4

PC software

4.1

Brief description

The PC software was developed for communication between PC and digital pressure measuring cell.
Using the PC software, the user can adjust the digital pressure measuring cell (offset) and set various
parameters within the device.
Communication between PC and digital pressure measuring cell is via PC-Interface with Converter USB/
I²C TO39, which also provides the operating voltage for the connected pressure cell.
The PC software is designed for online operation. The data to be set are read out from the connected
digital pressure measuring cell, displayed, modified by the user and written back into the device.
It is not necessary to save data in a file on the PC, and a printout is also not required.
4.2

Installation

4.2.1

Hardware and software requirements

For operation and the installation of the PC software the following hardware and software requirements
have to be met:
• Notebook or Desktop-PC
• Microsoft Windows 7 or newer
• USB interface
• PC-Interface with Converter USB/I²C TO39 (Part no. 00695325)
4.2.2

Starting installation via download file

NOTE!
The PC software was developed for communication between PC and digital pressure measuring cell and
is available as a free download at www.jumo.net.
1. Start the installation file after the download via Windows Explorer.
2. Follow the installation instructions.
4.3

Connection to the computer

To use the PC software, the digital pressure measuring cell must be connected to the PC/Notebook via
PC-Interface with Converter USB/I²C TO39.
(1) PC/Notebook – setup software installed
(2) PC-Interface with Converter USB/I²C TO39 (Part no. 00695325)
(3) Digital pressure measuring cell
4 PC software
19