Table of Contents
Advertisement
Quick Links
MARLOWE CHANGING TABLE AND TOPPER
WARNING:
FALL HAZARD – To prevent death or serious injury from falls, always keep child within arm's
reach. NEVER LEAVE CHILD UNATTENDED and always use restraining system.
This changing table is intended for use with children weighing up to 30 pounds.
Marlowe changing topper will be used with Marlowe Changing table (sold separately) with size
44''W x 19-1/2''D x 36''H. Cushion pad size is 32"L x 16"W x 4"H.
Do not use the changing table if it is damaged or broken.
Customer Service- If you are missing parts or have any questions about this product, please
contact us at : 1-800-762-1751
IMPORTANT SAFETY INSTRUCTIONS:
Please read all instructions before use of the changing table.
For your safety, assembly by two or more adults is recommended.
Keep instructions for future use.
PRE-ASSEMBLY:
• The illustrations provided allow for easier assembly when used in conjunction with the
assembly instructions.
• Remove all parts and hardware from the box and lay out on a carpeted or scratch-free work
surface. The shipping box provides an ideal work surface. Do not dispose of any contents
until assembly is completed to avoid accidentally discarding small parts or hardware.
• Use the parts on the hardware list to identify and separate each of the pieces included prior
to starting assembly.
• Note: DO not fully tighten the screws until all parts are in place. Failure to follow these
instructions may cause the screws to misalign during assembly.
• If using power tools to aid in assembly please use caution. Power tools can damage
hardware or split wood.
PARTS INCLUDED:
A [1] Topper
HARDWARE INCLUDED:
B [8] Wood screw 3.5x15mm
C [2] Metal bracket
ASSEMBLY INSTRUCTIONS:
-Page 1 of 3-
Advertisement
Table of Contents
Related Manuals for baby&child MARLOWE Series
Summary of Contents for baby&child MARLOWE Series
- Page 1 MARLOWE CHANGING TABLE AND TOPPER WARNING: FALL HAZARD – To prevent death or serious injury from falls, always keep child within arm’s reach. NEVER LEAVE CHILD UNATTENDED and always use restraining system. This changing table is intended for use with children weighing up to 30 pounds. Marlowe changing topper will be used with Marlowe Changing table (sold separately) with size 44’’W x 19-1/2’’D x 36’’H.
- Page 2 To connect the Marlowe Changing Table Topper (A) to Marlowe Changing Table Base (sold separately), place (2) Metal Brackets (C) over the pre-drilled holes on back of Topper and secure it to Changing Table with (8) Wood Screws (B). CARE INSTRUCTIONS: •...
- Page 3 1. Attach one of the mounting brackets near the top back edge of the furniture piece by inserting the shorter screw. 2. Determine the final position of the furniture piece. Mark location on the wall approximately 2” below the bracket mounted to the back of the furniture. 3.
Need help?
Do you have a question about the MARLOWE Series and is the answer not in the manual?
Questions and answers