Volkswagen Golf 2013 Service page 64

Golf 2013 ➤
Maintenance - Edition 10.2012
♦ Used oil collection and extraction unit -VAS 6622-
♦ Oil spill cloth -VAS 6204/1-
♦ ⇒ Data sheets for exhaust emissions test
Drain engine oil.
Perform the following procedure:
Note
After the engine oil has been drained, the oil drain plug must
♦
always be renewed. This prevents leaks.
Observe disposal regulations!
♦
– Remove oil drain plug.
– Let engine oil drain.
Note
Observe disposal regulations!
– Screw in oil drain plug together with seal hand-tight and then
tighten to specified torque.
Torque setting
Oil drain plug
– Replenish engine oil, specification
Engine oil capacity:
♦ Power unit ⇒ Rep. gr. 17 → Removing and installing parts of
lubrication system → Oil capacities
♦ Maintenance tables
For technical reasons it is possible that several cross references
are not directed to the correct chapter. In this case select the pro‐
cedure manually in the information.
WARNING
♦ Torque specifications must not be exceeded.
♦ Excessive torque can cause leaks in the area of the oil
drain plug or even damage.
60
4. Descriptions of work
Nm
30
⇒ page 5 .