Golf 2013 ➤
Maintenance - Edition 10.2012
– Continue exhaust emissions test according to instructions on
display.
– If the EET specification selection is displayed, select respec‐
tive "EET specification selection" -arrow-.
♦ If exhaust emissions test is performed initially, either select
"Standard values",
♦ Or "Last vehicle" when an EET is to be performed again.
– Select "Continue" on display see -item 1-.
Vehicle data input:
The vehicle data input menu is displayed.
– Enter the following data:
♦ Registration number
♦ Key numbers
♦ Vehicle identification number
♦ Type of fuel
♦ Odometer reading
The following vehicle data can be found in the vehicle registration
certificate part 1:
♦ Registration number: "e.g. WOB-HH 1234"
♦ Emission key No. "field 14.1 (code for field 14)"
♦ Vehicle manufacturer: "Field 2", "Field 2.1 (code for field 2)"
♦ Vehicle identification number "field E"
♦ Type and version "Field D2 (type only)", "Field 2.2 (code for
field D.2)"
Note
Further functions can be called up using GoTo button.
♦
The test can be terminated using GoTo button.
♦
– Select "with OBD", -arrow-.
Specified data input for EET:
Note
If specifications are not available as bar code, they are to be
♦
entered manually.
♦
All test conditions and data required for exhaust emissions
test, see ⇒ Data sheets for exhaust emissions test for respec‐
tive engine.
Manual specified data input for EET:
– Perform manual data input according to instructions on dis‐
play.
104
5. Exhaust emissions test