Volkswagen Golf 2013 Service page 102

Golf 2013 ➤
Maintenance - Edition 10.2012
♦ Torque wrench -V.A.G 1331-
4.47.1 Renewing spark plugs, 1.2 l and 1.4 l TSI
engines
Removing
– Loosen hose clips -1- and -2- and remove air pipe.
– Disconnect electrical connector -2-.
– Remove bolt -1- and remove respective pencil-type ignition
coil.
Repeat the procedure for all other pencil-type ignition coils.
Note
Observe installation position of ignition coils with output
♦
stages!
Ensure that the cables are not kinked or damaged.
♦
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Installing
– Screw in new spark plugs and tighten them to specified torque
using spark plug socket and extension -VAS 3122B- .
– Align and insert all ignition coils loosely into spark plug shafts.
– Press ignition coils with output stage onto spark plugs evenly
by hand (do not use a tool).
98
4. Descriptions of work